2025 KTM 300 XC-W Hardenduro

Benchmark Lap

• SMARTER ELECTRONICS - OFFROAD CONTROL UNIT: The Offroad Control Unit - or OCU - is located under the seat and replaces all the electronic fuses and relays. All outputs are switched depending on signals from the voltage regulator and the ECU continuously. In the event of over-current, outputs are deactivated individually. This makes for easy error detection as the status of each output is indicated by a red or green LED light. This means diagnosing an electrical issue out on the trail is as easy as lifting the seat, and there's no more need to carry fiddly fuses.
• FUELING SPEED - THROTTLE BODY INJECTION: ​The KTM ​2-stroke ​Enduro models ​feature​ electronically​-controlled Throttle Body Injection​ - or TBI. The ECU​​, together with ​a Keihin​ ​39 mm throttle body​,​ calculates​ the ​ideal air-fuel mixture by constantly analyzing water temperature, air temperature, ambient pressure, ​and ​pressure within the crankcase, ​the ​rpm, and the throttle position​ to ensure the smoothest and most consistent power delivery​ in the most gnarly of ​enduro conditions.
• PICK YOUR POWER - SELECTABLE ENGINE MAPS: Designed for easy operation, the map select switch comes standard on the KTM HARDENDURO and allows for the easy selection of 2 unique engine maps. Map 1 is the standard, more linear, and predictable power map, while map 2 is a more aggressive map for added throttle response and more crisp, explosive power output.
• LITHIUM POWERED - BATTERY & WIRING HARNESS: As with the rest of the 2025 2-stroke XC-W range, the KTM 300 XC-W HARDENDURO is fitted with a proven, reliable electric start system. Powered by an ultra lightweight 2 Ah lithium-ion starter battery, it provides a safe, reliable starting time and time again, while the wiring harness has most of the electrical components carefully positioned under the seat for easy accessibility.
• FLUID RIDER MOTION - ERGONOMICS: The 2025 KTM XC-W range features a rider-focused body-position triangle, especially when standing on the pegs. With the plastics working to expel mud buildup in wet, muddy conditions, a flat seat profile with a high grip seat cover providing exceptional rider movement and control, and a polyamide-reinforced aluminum subframe providing unmatched rider feel and feedback, your only concern is navigating the terrain ahead of you.
• UNMATCHED PERFORMANCE - EXHAUST: Binging the Braaap! Thanks to the KTM 300 XC-W HARDENDURO's compact engine design, the header pipe is designed with the target of achieving more ground clearance and reducing the risk of damage​ when riding over​ deep roots​, ruts, or climbing steep rocks. ​The silencer is crafted from lightweight aluminum, saving weight and provides the signature low-down 2-stroke burble for this rock-hopping hero.
• HARDENDURO EQUIPMENT - TOP-SHELF COMPONENTRY: The KTM 300 XC-W HARDENDURO models receive the full hard enduro treatment. From the standard-fitted radiator fan to machined anodized triple clam, right down to a solid rear brake disc, with safety wire, each and every element on a HARDENDURO model is specifically chosen for the job at hand.

Keeping You Going

• HOLD THE LINE - STABILITY: The 2025 KTM XC-W range remains rock-solid at any speed thanks to a repositioned and forged steering head connection and CNC-milled triple clamps. Made from high-grade aluminum, these feature optimally tuned steering stem stiffness, perfect alignment of the fork tubes, and precise geometry of the fork clamps to ensure highly responsive and smooth fork action - not to mention unwavering stability for those ultra-fast flat-out special stages.
• SEE INTO THE FUTURE: Swing your leg over the KTM 300 XC-W HARDENDURO and you're met with a diamante Factory seat, wrapped in a back seat cover with transversely stitched ribs, and protected by a water-resistant coating, you can be assured of maximum grip alt all times, with unrestricted freedom of movement when you need it.
• SEE INTO THE FUTURE - LED HEADLIGHT: Lighting the way forward, the 2025 KTM XC-W range features an LED headlight unit and light mask. The mask itself features improved triple clamp protection against roost and does away with the rubber mounting straps for improved fitment. Most importantly, the LED lighting unit provides serious illumination, making riding in the dark a completely new experience.

On The Charge

• BUILT TO BE THE BACKBONE - FRAME: Specifically engineered for longitudinal rigidity, the 2025 KTM 300 XC-W HARDENDURO is engineered around a gloss-orange powder-coated frame providing exceptional rider feedback, energy absorption, and high-speed stability. This is achieved by repositioning the rotating masses in the frame along with a forged steering head connection. The footrest mounts also feature a slim design for less risk of hooking up. And when the ride comes to an end, a forged one-piece side stand ensures your enduro weapon stands proud.
• MORE THAN A SUBFRAME - SUBFRAME: An ultra-light lightweight subframe takes charge at the rear of the main frame, featuring a 2-part polyamide and reinforced aluminum construction. With the help of computational dynamics, a specific rigidity was engineered into the subframe, to deliver outstanding handling and rider feedback. This compact subframe design also boasts the the ability to bend and flex in the event of a crash, rather than break, with the subframe fully integrating electronic components, without any extra need for brackets, holders, or unnecessary fixtures.
• HANDLEBARS: Held in place by a set of CNC-machine triple clamps, the handlebar on the KTM 300 XC-W HARDENDURO features a unique bar pad and soft, grey, ODI lock-on grips for ultimate control. A set of wrap-around handguards provides further protection from unwanted obstacles in your path.
• UNFLAPPABLE FRONT END - WP XACT CLOSED-CARTIDGE FORK: A 48 mm WP XACT Closed Cartridge spring fork provides fast and consistent damping, with optimized oil flow. This means these forks ensure unmatched performance at every level. Fork protection rings also protect against dirt intrusion. But, best of all, the fork allows for full adjustment of compression and rebound without the need for any tools.
• GET THE POWER DOWN - WP XPLOR SHOCK: Remaining a hallmark of KTM Enduro weaponry, a PDS rear shock concept improves the anti-squat behaviors of the chassis. This remains the most reliable and maintenance-friendly option for competitive enduro racing. Moreover, a lightweight WP XPLOR PDS rear shock takes charge at the rear. For 2025 the rear shock received updated settings, resulting in improved pressure balance within the shock. With consistent damping, as well as full adjustability thanks to easy-to-use hand clickers for adjustments on the fly, it remains the setup to beat.
• WHERE RUBBER MEETS DIRT - WHEELS AND TIRES: The KTM 300 XC-W HARDENDURO rolls on a full-factory wheel set made up of high-strength black D.I.D alloy wheels coupled to orange-anodized CNC-machined hubs, black spokes, and orange aluminum nipples. These are wrapped in a set of ultra-grippy DUNLOP MX33 front & AT 81 rear tires providing exceptional traction in all conditions.
• STOPPING POWER - BRAKES: Slowing the KTM 300 XC-W HARDENDURO comes courtesy of a floating front brake disc and solid brake disc on the rear. Not only does the latter provide increased pad life and heat dissipation, its also safety wired directly from the factory. Both ends also get brake protection as standard, with a composite front brake disc guard and orange anodized rear disc guard as standard.

Prologue

• SETTING THE SAG - ADJUSTABILITY: Getting READY TO RACE has never been easier. The 2025 KTM XC-W range boasts a tool-free suspension setup at both ends. At the rear, our legendary, race-winning PDS technology features hand-adjustable dual compression controls, allowing riders to adjust high- and low-speed settings in a matter of seconds. On the front, the forks are also easily adjusted thanks to hand-adjustable clickers on the bottom of the fork shoe and on the fork top cap, making changing settings on the fly as easy as twisting the throttle.
• DEEP BREATH - AIR FILTER BOX: The air filter box is designed to ensure maximum airflow with minimal water intrusion. Precision in how the inlet ducts are positioned is aimed at preventing air deformation and maintaining filter protection. An enduro-specific splash protector under the airbox prevents water or dirt from splashing up from the rear wheel, while the Twin Air filter and air filter support design features a simple fail-proof mounting system for a secure and accurate filter installation. All this ensures the air filter is easily accessed, without tools, for fast trail-side maintenance.
• FULLY FUELED - FUEL TANK: The transparent, polythene (XPE) fuel tank is a signature element of the KTM Enduro lineup. Having undergone thorough race testing in everything from the GNCC to the hardest of FIM hard enduros, these tanks are built, well, like tanks! A one-piece fuel pump and filter manage fuel supply, while servicing is made extra simple with easy fuel filter access. What's more, an updated fuel tank roll now holds the tank more firmly in place and protects the frame against scrubbing.
• SWITCH IT UP - SWITCHGEAR: On the right side of the handlebar, you'll find a sleek start/stop switch, and on the left, a Mapping Select switch will allow riders to choose between Map 1 or Map 2 - standard on the HARDENDURO.
• UNMISTAKABLE - GRAPHICS: The 2025 KTM 300 XC-W HARDENDURO is hard to miss, with striking white-on-black graphics, and a ribbed black seat cover all overlayed onto black and orange fenders, it makes a statement. This is one graphics package you won't want to swap out.